little input to start of,  i was gifted this cutting! yes it had mites all over it .  I just wanted to kill it.  However i was told that, it was killer weed.

It has taken some time to kill the mites,  was a serious problem.  To be honest i not sure i would do it again.

Any way i got some plants on mapito,  and they are turning out to look a little to big for the space and height, my bad.

Straight good old canna fert, hydro what can go wrong?

Little run down on what I’m using 1.2sqm green cube tent DNA some l with cork

DNA base nutrients 

Buddhas tree additives ( may not use them!)

plagron bat guano

guanokalong potash

alfafal meal

ecothrive charge

ecothrive biosys

xtreme tea

315w full spectrum cmh + 300w spectrum king led (if doesn’t get too hot!) if it does I’ll just use my 400w spectrum king led 

so far have just had water and a weekly xtreme tea root drench heathy as anything and probably won’t need any feed till week 3 of flower but I may give them a light feed!

i will upload pictures later!

Here are some news & pics of my current grow. The strain I selected is the M.O.B from TH seeds!

M.O.B aka  "Mother of  Berries"

(text  on top and pic below is from thseeds website)

I put the seeds the 1 decembre.

All seeds germinate out the soil at the 5 decembre.

SETUP

VegRoom is a clone boxe from homebox and the flowerRoom is a "homemade box" of 1mx 1.1m & 2,2m high

Ligth for the veg : Fluo compact 2x55w ( i add 1 fluo compact 2x80w after 2 week of grow)

Ligth for the flo : 600w 400v Gavita

Soil: Growmix Plagron

Nutrient: Plagron terra grow/bloom/PK13-14 + Aptus Calmag Boost + GH Ehancer

Pics of grow + 13

I'm a newby grower. 

I've recently started a new grow with seeds bought from a seedbank (current grow is nearing completion - 2 bag seeds, no idea of strain).

Anyhoo, I have germinated feminized four seeds: Dutch Kush; Duch Dragon; Nebula; and White Berry (all from Paradise Seeds).

All four germinated in soggy tissue although the White Berry was a very small seed and had only just cracked when I planted into 'TROPIC BAT MIX'.

They're in a 0.6m x 0.9m x 0.6m Bay 6 tent under a 125w CFL (Blue).  Humidity is ~ 80% and temp ~ 83°F.

Dutch Kush and Nebula are bottom left and bottom right respectively.

I'm going to be using the Shogun range of fertilizers, although not for a while as the Tropic Bat Bix should do for the next 4-5 weeks I think.

Here are the grow I will make for the memory of Franco.

I see him for the first time in Amsterdam in 2010 for the HTCC. Every time I ask him for infos or tips for growing, harvesting, cup or anything else, she take time to help me, send me files or pic.  

So, when I see that the "Super Lemon Haze" and the "Exodus Cheese" are back in stock I immediately thought of making a grow journals in his memory with these two varieties that he took to the highest level with the whole GH team. 

The first strain i selected for this grow dairies is the famous SUPER LEMON HAZE...

Veg SETUP:

VegRoom : Clone boxe from homebox

Ligth : Fluo compact 2x55w(blue spectrum) & i add 1 fluo compact 2x80w (blue and red mix spectrum) after 2 weeks of grow

Nutrients : Plagron terra grow + Aptus Calmag Boost + GH Ehancer

Substrat : Growmix from Plagron

Container : 1ltr plastic pot transplanting on a 19,3ltr Smart Pot after 3 weeks of grow

Flo SETUP:

FlowerRoom :"homemade box" of 1m x 1.1m & 2,2m high

Ligth : 600w 400v GavitaPro

Nutrients : Powder Feeding longFlowering & Booster with GH Ehancer & Calcium add.

SUPER LEMON HAZE (Feminised)

70%  SATIVA  -  30%  INDICA   

THC:  19.33%  CBD:  0.21%   CBN:  1.15%   

GENETICS 
Lemon Skunk x Super Silver Haze.

EFFECTS 
A very citrus-like haze, works fast and lasts long. 
It is a very powerful high, very balanced between a physical and a cerebral side. 
Medicinally effective in pain therapy and appetite stimulation. 

FLOWERING INDOOR 
10 weeks, with a production up to 800 gr/m². 
Medium-tall plant, long and wide branches, ideal for ScrOG or LST. 

AWARDS 
1^st HTCC 2008, 1^st HTCC 2009, 1^st IC420 Growers Cup 2010, 2^nd HTCC 2010, 1^st Seattle Medical Cup 2012, 2^nd ExpoGrow-Irún 2012, 1^st ExpoGrow-Irún 2013.

So like Franco say, Peace, love & THC 

You need:

Silver nitrate - AgNO3 (only expensive part of STS) – can be found on ebay or chem shop, cost is about 30$/10g - 10g will last for 12l of foliar spray!!!

Sodium Thiosulfate or Sodium thiosulfate pentahydrate - Na2S2O3 or Na2S2O3-5H2O - can be found on ebay or chem shop.

Distilled or RO water, kitchen or medical gloves, syringes, plastic bottles.

Mixture A

Take your scale – you need 1.7g of AgNO3 – use gloves and be carefull cause AgNO3 will leave dark black marks almost impossible to clean on your skin. But don't worry - they will stay for a few months – new skin new look

Add 1.7g of AgNO3 to 100ml of distilled water. Dont use any metal objects – only plastic or glass! This is mixture A – it should be put in dark place [no direct light!] or in the dark plastic bottle.

Mixture B

6.32g of Na2S2O3 or 9.92g of Na2S2O3-5H2O - add it to 400ml of water. It doesnt have to be distilled water but it is better to use it. You can add 6.3 or 9.9 if you have 0,0 scale. This is mixture B. You dont have to protect it from light.

Mixture A and mixture B can be stored for a long time in a dark place.

Mixture STS

Now we can make STS: you take 5ml of mixture A and 20 ml of mixture B – slowly stiring you add A to B and have mixture STS. STS is not as stable as mixture A and B alone and should be use as fast as possible. It is better to make amonut of STS you use in one foliar spraying.

Now we have STS so we can use 1:2, 1:3 or 1:4 concentration. It means you add your mixed STS to water. Concentration means: 1:2 – 1 part STS 2 parts water [25ml STS + 50ml water], 1:3 [25ml STS + 75ml water] etc. Now you can use this mixture for foliar spraying.

It is best to start from 1:3 concentration – if nothing happens you can use stronger concentrations. All depends on experience, strain and other factors. Some strains are easy to herm – some not.

It is best to use STS as soon as flowering starts. Male bananas popping from female flowers will give you feminized pollen!

Peace brothers!

I use LED VIPARSPECTRA light (all reviews recommended using this brand/type..

Your help/advice would be really helpful.. Thanks!

This presentation is so well done, explanations so very easy to understand, I find his videos are just the thing for beginners as well as for some experienced growers.  I feel certain that even experienced growers will hear ideas from him that you hadn’t thought of before.  He is clever and logical.  If you have ever had trouble in your grows or if you want grow-tips to avoid so many common mistakes, Watch This 7-Part Series!

I have liked his Series so much that I decided to outline each part for you below.

Here are the titles and the current links to his presentation.  Take notes; you’ll thank me later.  All the following is provided for informational purposes only.  Your results may vary, and the risk for you and your plants is entirely yours.  The links are found at the bottom of each post, after the outline.

(If the links are disabled, you can try to search Youtube for the titles to see if it has been re-posted under different links.  Normally, if you can find one of them, you will have also found the whole Series.  Or you can search for the author – NVclosetmedgrower.)

I hope that you enjoy the Series.

OK, Here we go:

How to Grow Part 1, Seed Germination.

The Link is found at the bottom of this post, below the outline.

-Step 1: Hydrogen Peroxide (2-3 drops) in RO-water in Solo Cup for initial 24 hours in cup.

-Step 2: Paper towel until Taproot extends

-Step 3: Germination and transfer to Initial Cup of Soil

-Soil-less Mix Description: Jiffy Seedstarter Mix with 20% Perlite, consisting of: Peat Moss, Vermiculite and Dolomite Lime, flushed with 2 cups of 5,5pH RO-water to reduce the alkaline effects of the Dolomite. One drop of CloneX(a cloning gel containing Vitamin B1 and Butyric Acid) applied 1 inch deep under where the seed/w-taproot will be placed into the cup.  Maintain 70+% Humidity using a simple plastic bag over the cup.  (A substitute for CloneX is Schultz “TakeRoot”, a powder which contains 0,1% Indole-3-butyric Acid.  Obviously, one would need to determine whether a powder or a gel would be preferable depending on the method of its use.  I have both onhand.)

https://www.youtube.com/watch?v=LYIYFyFNMFg&list=PLfKFNZAfF1GxcVdCc4XPxMCKqmRiWVh71

voici le tableau

4 lémon skunk green house féminised

3 orange bud dutch passion féminised

3 super skunk sensi seed féminised

terreaux light mix plagron

600 hps  reflecteur adjust awings avenger grand

ballast lumatek dimmable

extracteur primaklima 800m3 heure

intraction 420m3 heure

1 ventilateur oscillant

engrais pack canna minéral terra

je reviens pour un nouvelle culture ma configuration est toujours la meme 600w hps  ballast lumatek dimmable

la première étape c'est bien passer avec 100% de réussite a la germination .

seed blue emerald feminised de novastore

600w hps

soil house and garden ligth mix + perlite

nutritions canna mineral ,rhizotonic ,canna vegas ,canna flores,canna pk13 ,canna booster,cannazym

pot 18L

extraction 800m3 heures

intraction 400 m3 heures

Second question.

2. Ok so my feeding schedule is as follows: fwwwfwwwf.  I use ro water with cal/mag. I never use just ro water well thats my intention,

I have 8gal smart pot with trays is that a good feeding schedule & is it necesary to flush at least once a week dumping out water that empties out on pot trays?

I grow with leds lights. 

I lst and scrog as well 

what I would like to know is how far do you have your lights away from your plants when in flowering 

the reason I ask this is because I only got 15 oz off 6 plants and I had 3 x 1500 watt leds 

i had my lights set at 18 inches above my plants. 

all my plants were healthy 

With the onset of winter, and the low temperature, I am happy to start a new indoor crop, a winter crop. My intention is to make a 100% Natural culture, 100% BIO. So .... What better occasion to try the BIO nutrients from Green House Feeding? 

In this crop I will use the new BIO nutrients from Green House Feeding (coming soon). It will be great to evaluate results personally. If you want to see how they work, or have any questions, maybe I can help solve it 

This time I decided to use cuttings, instead of seeds. My intention is to grow a lot, before beginning the flowering. Maybe three or four weeks under 400w / 600w metal halide. Then, maybe the flowering will begin on the middle of January (if all goes well).

It is an indoor of 1.2m2
With light 250w / 400w / 600w and 600w SL
Extraction and intraction system of air
Substrate:  soil - Normal soil / A little coconut fiber
Nutrients: Green House BIO Feeding
Containers: Smart Pot 12 Liters / 3 Gallons

Ok, it's the first time thats I use Smart Pot containers, so you should have patience haha 

First of all, I want to put a little armalite / arlite (volcanic rock) on the bottom. This is to improve drainage, just put it a little.

Actually, how is the first time thats I use this type of container .... I want to see the difference, So I add a classic container 12 liter / 3 gallon.

I put some earth, about halfway. And then I add some Green House Feeding BIO GROW.

According to the indications, 3gr / liter of BIO GROW should be used, for a standard culture of one month and a half, or two months of duration. I start with cuttings, so the growth period is only a few weeks or a month. I Use only half of the recommended dose, use 1.5 gr / liter.

Once I added BIO GROW, I put more soil and put it all together. Be careful not to move the volcanic rock from the bottom. I try to make a good mix. 

Also I add a big handful of coconut fiber to each pot. I like to mix it up, to make it a little more fluffy, and keep the moisture better.

Now only the transplant is left. This part is boring and dirty, you have to be careful with the delicate roots of the cuttings.

When the transplant is finished, I water the pots with water. Only water with PH set to 6.2  (about 1 liter per pot).

Once finished, I like to add a bit of volcanic rock / arlite, on top. In this way I can retain moisture better, the soil does not dry out easily.

At the moment, I will use 400w. only. In a few days, maybe 600w. 

The volcanic rock / arlite, has a horrible ph. You have to soak for several days, with a regulated pH (a bit acid). So that they stabilize. Always, before use.

For now .... this is it

i was given this lovely lot. 

Have to admit I didn’t want to do another grow 

This is my 3rd grow and boy have I come a long way. Im still not a pro, but I have learned alot.

My second grow was unsuccessful because of my lack of experience in growing in promix coco coir. Heat also being an issue.

Anyways back to the Velvet Bud grow....

Apparently Velvet bud is a descendent of Purple bud. Velvet bud is produced by Seedsman. I didn't pick this strain. It was given to me because of a order blunder from the local outlet...so this is how I ended up with it.

My set up is: 

800mm x 800mm x 1250mm  grow tent

400w MH/HPS

400w digital ballast

100mm centrifugal extractor fan

4 x 20L pots

Soil medium : promix coco coir perlite mix 50/50

Pots lined with filter floss 

Hydroponics system using normal 3 part nutrients system. Grow nutes Micro nutes and Bloom nutes by EHG.

Seedling stage:

3 out of 5 seeds germinated. Seedlings where ready for transplanting into the bigger pots after about 2 weeks. Used a humidity dome to keep the fellows warms as temps where still cool. I felt that the seedlings responded well to a temp of 24 celcius. 15% nutes of bloom grow and micro. Two seedlings flourished while the 3 guys lagged behind a bit. Unfortunately no pics of the seedling stage.

Vegative stage: 

Once these guys got into the bigger pots they just took off. Ramping up the nutes gradually to 90 % of the recommended dosage with Grow, Micro and CalMag( a definite must for growing in coco coir).

I only topped these plants once, then after a few days I LST the 4 main branches by pulling them down with pipe cleaners.

The above picture is after 3 weeks of vegging since I put the seedlings into these pots. Good vigorous growth for Velvet Bud!

I ended up using an auto pot for one on the right. I also added an airstone and pump. You can clearly see the difference!

Im not doing any testing. Im just following the schedule on the nutrient bottle but dosing slightly less and seeing how the plants respond. I add a table spoon of CalMag to every 10L of normal tap water. 18/6 light schedule with MH globe.

Temps where a little low so I added a temp sensor switch to my extractor fan. When the light comes on it also acts as a heater, so when the temp got to 25 celcius the extractor fan would come on and cool the tent and plants down with cool air from the outside.

Above is a picture of the temperature controller. The sensor is in the tent, it also has a heating as well as a cooling option. This controller really helps with keeping a constant temperature.

The above pic is at 4 weeks veg. 

Nice lush vigorous growth.Plant is looking really bushy and healthy. Velvet bud is responding well to the nutrients. Grow 20ml/10l, Micro 10ml/10l and Tblspn CalMag. Normal tap water with no testing.

You're probably wondering what that piece of acrylic is for....well its a budget way to replicate a ventilated hood. I'm not using the temp controller anymore as the outside temps have risen so now I have the extractor fan running constantly. I had a piece of perspex(acrylic) clear cut to fit the tent perfectly. I used a holesaw to cut holes into the acrylic glass directly under where the globe would be. I did this because when the extractor fan creates the negative air pressure inside the tent, its will pull the tent tight around the edges of the acrylic and force the cool air from the bottom compartment into the above compartment directly over the globe therefore also keeping the globe cool and keeping my plants cool. Its also adjustable.

I also have been using a humidifier on and off. I usually only use it weather depending.

During this time I also took six clones. I used a rooting hormone and rockwool cubes all six clones rooted after 10 days. Velvet Bud takes good clones!!! I gave 4 away (good karma) and added 2 clones to a fourth pot. 

I had to leave for a month and had to ask very nicely if she would take care of them. I had to mod the grow to make it as easy as possible for her maintain. So I bought a tray to fit the tent and ripped out the single auto valve I had, stuck it in the center of the tray, chucked the plants in, filled the tray with hydroton balls, made a watering schedule and nutrient mix levels( 20ml/10l bloom 10ml/10l micro 1/2 Tblspn CalMag) 10l and Mondays and 10l on Thursdays and had to leave for a month wondering if my girlfriend would take good care of my babies........

Whoo hooo!!! So after a month of flowering I return to this!!! Velvet Bud is looking so good and really is starting to smell so good. Nice sweet fruity smell ! My girlfriend did good!!! Box of chocolates for her!! 

I was mostly impressed with the two clones I had planted into the fourth pot front right in the picture. Heads as big as the rest and looking super healthy with fat nugs forming on the stems.

Week 6 of flowering and Velvet Buds are swelling up and are just smelling irresistible!!

Another wider pic at 6 weeks. Tents is so full!! 😁

The above pic is at 9 weeks flower. Buds are full of trichomes and have been flushing. Trichomes are not completely cloudy though so will defs have to go for another week.

9 weeks....

Buds are so fat they are starting to lean on each other with only the tent sides holding them up!

Thats all for today folks.....will continue with this grow story once I have harvested. Its just about ready.

Till then..chow

 I am starting this diary just before I put the plants into flower I did have issues with the coco  getting too hot temps got to 37°C  suffered a lot of root rot so I tried to take cuttings and forgot to put them under my strip  lights left them under the LED and cooked them thankfully I didn't totally destroyed the plants so I invested in some CX horticulture Regen-A-Root  which worked wonders they are a picture of health I have 2 pink lemonaid and 1 lemon jones.  I also have 4 tangilope DNA genetics and 2 cotton candy cane seedlings and I'm about to pick up a cutting of ice bomb and candy unsure of breeders.  I am using spectrum king LED 300W and 400w in flowering as outside temps have dropped! I am feeding them with, coco nutrients The cuttings I'm picking up are potted  into Canna terra soil so they will be fed With guano kelp potash and worm castings with occasional feeds of ecothrive charge and biosys.  I will put pictures up later as my data is very low speak to you soon

Here i am with my first Journal at this Foroum

Thanks my mate @Kenny Kirkland for giving the necessary push to join

u

I am really glad to show the White House

It `s 1,6 x 2,5 x 1,6 

There are 4 HPS 400w working 20/4

for 5 x Sweet Mango Auto

and 5 x Green o Matic

This begins on 21/11 when the seeds were placed on the pot

Then they  were covered with a nylon  to keep moisture inside the pot and promote

germination

My 5lt Gibert is always ready to help me

After 3 days keeping moisture up  . . .

◆【公司宗旨】:诚信为主,质量为本,客户为先,解您所忧 ! 
-----------------◆---------------------业务范围-------------------◆----------------------------- 
◆【主营国家】:加拿大、澳大利亚、新西兰、新加坡、美国、英国、欧洲----- 等等! 
-----------------◆---------------------联系方式-------------------◆----------------------------- 
◆【贴心专线】: 
★敬请保留此联系方式,以备用!如有不在线请给我们留言!我们将在第一时间给您回复! 
★★此贴长年有效——欢迎各位新老顾客咨询,我们将会竭诚为您服务!& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #
毕业证成绩单【微信号176555708】 办理国外大学毕业证、修改成绩单、offer录取通知书、文凭、学位证、diploma、offer、教育部认证，留信网认证，使馆认证。

AUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of TechnologyAUT成绩单毕业证微信号176555708奥克兰理工大学毕业证成绩单】修改新西兰AUT成绩单成绩单Auckland University of Technology

◆【公司宗旨】:诚信为主,质量为本,客户为先,解您所忧 ! 
-----------------◆---------------------业务范围-------------------◆----------------------------- 
◆【主营国家】:加拿大、澳大利亚、新西兰、新加坡、美国、英国、欧洲----- 等等! 
-----------------◆---------------------联系方式-------------------◆----------------------------- 
◆【贴心专线】: 
★敬请保留此联系方式,以备用!如有不在线请给我们留言!我们将在第一时间给您回复! 
★★此贴长年有效——欢迎各位新老顾客咨询,我们将会竭诚为您服务!& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #
毕业证成绩单【微信号176555708】 办理国外大学毕业证、修改成绩单、offer录取通知书、文凭、学位证、diploma、offer、教育部认证，留信网认证，使馆认证。

UOA毕业证成绩单微信号176555708奥克兰大学毕业证成绩单「微信号176555708」新西兰UOA成绩单成绩单The University of AucklandUOA毕业证成绩单微信号176555708奥克兰大学毕业证成绩单「微信号176555708」新西兰UOA成绩单成绩单The University of AucklandUOA毕业证成绩单微信号176555708奥克兰大学毕业证成绩单「微信号176555708」新西兰UOA成绩单成绩单The University of AucklandUOA毕业证成绩单微信号176555708奥克兰大学毕业证成绩单「微信号176555708」新西兰UOA成绩单成绩单The University of AucklandUOA毕业证成绩单微信号176555708奥克兰大学毕业证成绩单「微信号176555708」新西兰UOA成绩单成绩单The University of AucklandUOA毕业证成绩单微信号176555708奥克兰大学毕业证成绩单「微信号176555708」新西兰UOA成绩单成绩单The University of AucklandUOA毕业证成绩单微信号176555708奥克兰大学毕业证成绩单「微信号176555708」新西兰UOA成绩单成绩单The University of Auckland

◆【公司宗旨】:诚信为主,质量为本,客户为先,解您所忧 ! 
-----------------◆---------------------业务范围-------------------◆----------------------------- 
◆【主营国家】:加拿大、澳大利亚、新西兰、新加坡、美国、英国、欧洲----- 等等! 
-----------------◆---------------------联系方式-------------------◆----------------------------- 
◆【贴心专线】: 
★敬请保留此联系方式,以备用!如有不在线请给我们留言!我们将在第一时间给您回复! 
★★此贴长年有效——欢迎各位新老顾客咨询,我们将会竭诚为您服务!& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #& #▽?←☆≈@ * & #
毕业证成绩单【微信号176555708】 办理国外大学毕业证、修改成绩单、offer录取通知书、文凭、学位证、diploma、offer、教育部认证，留信网认证，使馆认证。

DIT毕业证成绩单「微信号176555708」都柏林理工DIT毕业证成绩单「微信号176555708」都柏林理工学院毕业证成绩单】修改DIT成绩单使馆认证留信网认证Dublin Institute of TechnologyDIT毕业证成绩单「微信号176555708」都柏林理工学院毕业证成绩单】修改DIT成绩单使馆认证留信网认证Dublin Institute of TechnologyDIT毕业证成绩单「微信号176555708」都柏林理工学院毕业证成绩单】修改DIT成绩单使馆认证留信网认证Dublin Institute of TechnologyDIT毕业证成绩单「微信号176555708」都柏林理工学院毕业证成绩单】修改DIT成绩单使馆认证留信网认证Dublin Institute of TechnologyDIT毕业证成绩单「微信号176555708」都柏林理工学院毕业证成绩单】修改DIT成绩单使馆认证留信网认证Dublin Institute of TechnologyDIT毕业证成绩单「微信号176555708」都柏林理工学院毕业证成绩单】修改DIT成绩单使馆认证留信网认证Dublin Institute of Technology学院毕业证成绩单】修改DIT成绩单使馆认证留信网认证Dublin Institute of Technology