Dunc32 AIR POTZ flood and drain,

[THE HANDYMAN]

ok so i done this idea that i use an airpotz air pruning pot instead of a net basket,

so iv put together this to see what it works like,

all it is ,is an underbed tote,35ltr,

a 10ltr bucket,

hose

15mm pipe elobows

a water pump(mine 6w)

air pump,

air stone,to fit under the airpot,.

as you see there is a flood and drain at the bottom and an over flow at the top,

make sure that your outlet is smaller so that it lets out less than u are pumping in,

and the over flow must be same at least as the flood in.

there are some holes in the tote to take the hoses,

if you need to know anything let me know im sure u will work it out with the pics tho,

ps make sure that the pump isnt to high as this will stir up the medium u use to much,and make sure it is under the air pot,

,

i will post the grow that is in this as well so you can watch it grow,

i may do this for one of my cup grows tho im not sure yet,

hope u like it anyway,

il put the link for the KALASHNIKOVA AUTO GROW HERE WHEN UP OK!

cheers guys

[Dust]

you really like to build stuff man, and you do it well everytime!

Thanks for sharing that very nice DIY once again

Have a good testing

[THE HANDYMAN]

THANKS MAN!!! that really means alot!!!

[THE HANDYMAN]

my grow with this is in the hydro section if u wanna follow it ,its a kalashnikova auto

[Buzz13]

It looks pretty good, good work

[bozoph]

leave that top ring off. u need light to hit the sides of the air pot. . if not roots will just grow out the wholes