Jump to content

super lemon haze . ebb and grow


cable
 Share

Recommended Posts

high every body i am new so i might as well jump in the deep end this is the first time using seed bank seed . i am starting seeds in rock wool i soaked the blocks in 5.7 P H water for about and hour it's been 4 days now and 2 seeds have poped  .they will go in and ebb and grow i will be using 400 watt metal halide for veg and a 600 watt hps for flowering  #1 is my scrog and the control bucket for my edd and grow#2 is my 600 watt digital ballast it will also take my 400 watt metal halide #3 air intake it's a 3 stage 10 micron filter i diy #4& is my ebb and grow and #5&6 are baby pic of super lemon haze all comments are welcome   thats all for now

post-36006-0-54159100-1419356354.jpg

post-36006-0-55880700-1419356363.jpg

post-36006-0-49920900-1419356372.jpg

post-36006-0-77615700-1419356380.jpg

post-36006-0-09642100-1419356388.jpg

post-36006-0-90114500-1419356400.jpg

  • Like 1
Link to comment
Share on other sites

one of my past  grow

 

i am doing 6 i came home this morning and the last 2 were up .this is the first time used rock wool cubes                                     6 out of 6 not bad green house seed co.  made 250 ml of weak nutrients 

post-36006-0-32012900-1419453896.jpg

  • Like 1
Link to comment
Share on other sites

Thanks for sharigny our grow journal with us :)

 

Best of luck with those ladies, get ready for some possible stretchers with the SLH, you will probably have to work it a lil bit more under the net to keep a nice flat canopy than with some other strains due to the more sativa side, but nothing that hasnt been done and that can not be handle ;)

Have you planned on toping or somethings like this?

 

Have a good grow!

  • Like 1
Link to comment
Share on other sites

oh yea i will top the shit out of them probably add 2 more weeks to the veg to get them to fill up the scrog i put adjustable wings on the side to compensate for the light .  i can't wait  i  love growing :dancing:  

Link to comment
Share on other sites

No the way it's set up now it will have positive pressure because the temperature in this room is 60 and is heated by a propane heater so I want to take advantage of the free C02. As the air cool it will flow right to my filter box

Link to comment
Share on other sites

well the roots are showing out of the bottom of 3 of the cubes . i am going to wait for the last 3 to show and than i will start  my reservoir is 30 gal  the ph is 5.9 so that has to come down. tds 200 ppm  i am planning to go with the Lucas formula  so i have to figure out a weak nutrient solution i will be using general hydroponic micro and bloom i  need to get boom  :declare:   so i still got few thing to get i order   i wish the general  hydroponic set calculator still work online i can figure it out just lazy right now . if any body know of a good nutrient calculator drop let me know

  • Like 1
Link to comment
Share on other sites

well today's the day roots showing on every cube . most shoots 3" long looking for light so in the system they went set light at 200 watt made nutrients 1/4 straight .found 1 bucket that had a leak so i switch it out for another  . fun i have been checking them for leaks for days now i guess you can never be too careful .     

post-36006-0-62667100-1419799307.jpg

post-36006-0-21567900-1419799324.jpg

  • Like 2
Link to comment
Share on other sites

my reservoir temp 69- tds 430.4 - ph 5.8 added 4 ml pH down - metal halide set at 400 watts  . tent temp 70- humidity 53% it should hit 60% with the light set at 400 watts. the kids seem alright  

post-36006-0-05597800-1419888899.jpg

  • Like 1
Link to comment
Share on other sites

my reservoir temp 69- tds 430.4 - ph 5.8 added 4 ml pH down - metal halide set at 400 watts  . tent temp 70- humidity 53% it should hit 60% with the light set at 400 watts. the kids seem alright  

making  simple water tank level gauge

Link to comment
Share on other sites

  diy  water tank level gauge                                                                                                                                                                                                                                                                                                                                                                                        1 toilet float $3.oo 

  1/4" brass rod found at work :sarcastic:

1 stainless steel hose clamp  $ 1.00

1 bulk head fitting free  :sarcastic:

2- 3/4 x 1/4 reducer

 

post-36006-0-81738400-1420146484.jpg

post-36006-0-31631900-1421237490.jpg

  • Like 1
Link to comment
Share on other sites

Thanks for the news man! The ugly duck is indeed not looking great, but well it might go away after a few set of leaves and go back to normal.. we''ll see! And the rest looks nice they seem to like the new system yet ;)

 

Have a good grow!

  • Like 1
Link to comment
Share on other sites

up date res temp 68 degrees - tds 590 - PH 5.8 - tent temp 77 degrees - humidity 43%  

so here's a few pic .the first photo  i have decided to name this plant  Quasimodo because it is so deformed  .part of me said kill it and get on with it but i will keep and eye on quasi . she might be and unexpected gift   

the paper plates are to cut down on evaporation to help stabilize my reservoir and it has but  the humidity has dropped form 55 to 43 % so i will be using a cool mist humidifier on a timer   

post-36006-0-30626600-1420725244.jpg

post-36006-0-87188100-1420725248.jpg

post-36006-0-56354000-1420725253.jpg

  • Like 1
Link to comment
Share on other sites

 these photo's are from 1/11/15 i have been raising my ppm 100 every two day  i am using GH micro and GH maxibloom . i have been letting my PH drift from 5.6 - 6.1 . i slow drop the PH back down to 5.6 over the course of a few day    

post-36006-0-59081700-1421072242.jpg

post-36006-0-60966200-1421072265.jpg

post-36006-0-52966400-1421072271.jpg

post-36006-0-36017900-1421072277.jpg

Link to comment
Share on other sites

Nice man...last one is bad one...don't wait until its turn out...I'll better start another seedling...

Great start!

I grew that SLH 3 times and always turn out my favourite smoke...best strain from GHS..

  • Like 1
Link to comment
Share on other sites

up date photo's i notice a little yellowing between the veins on some of the plants starting from front to back might be a little low on nitrogen  . ppm 850 but they are growing fast  dropping the cycle timer 8 times to 4 every 24 hour this might help with the leaves drooping a little  

post-36006-0-74774700-1421090688.jpg

post-36006-0-73137600-1421090694.jpg

post-36006-0-99263700-1421090698.jpg

post-36006-0-09188900-1421090704.jpg

post-36006-0-61111800-1421090716.jpg

post-36006-0-30541400-1421090720.jpg

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...