Search the Community
Showing results for tags 'my love strain hunters'.
-
Equipment: Box 60x60x180 cm (0.36m2). Active air output at 100 m3/h. Passive air entry. Blowing air - canal fan at 100 m3/h. Pot - SmartPot 35 liters. Peat pot one litre. Substrate - "Ugro Pure Superior" Water - mineral osmosis 250ppm. Drip watering of my manufacture - tubes 5mm and a tank for 10 liters. Lighting: Collected by me according to my scheme. It includes an aluminum plate with ribs and active cooling - two 120 millimeter coolers (900 rpm), the size of a plate of 12 to 40 centimeters, a thickness of about 2.5 millimeters. Citizen's LED matrix: 3500k (50w); 3000k(50w); 3000k (100w) - all matrix connected to individual drivers from Mean Well - efficiency of about 91-93%. At a distance of 80 centimeters from the plant, the lamp gives about 33,000 lux, the chips are installed 90 degree lenses made of glass. Nutrients: Growth Technology ph down GHE PH UP GHE FloraMicro HW (not SW) GHE FloraGro GHE FloraBloom GHE G.O.Root Plus GHE Bio Bloom GHE Ripen GHE Diamond Nectar GHE Mineral Magic GHE FloraKleen Photo equipment: phopo box with illumination 5500k support tripod camera pentax kx (the second camera) camera pentax kp (main camera) lens smc pentax-DAL f3.5-5.6 18-55mm al ancient lens smc pentax-m f1.7 50mm ancient lens industar 61L/Z f/2.8 50mm + macro rings main lens - pentax HD DA 35mm f/2.8 Maсro Limited polarizing light filter Hoya hd circ Week 1 day/night - 20 /4 Growth - 3 cm pot - 1 L Water (no compote) 5,7 ph - 250 ppm - 23 degrees C. 0.08 L a day day/night temp. - 23.C/23.C 50% humidity distance from lamp to plant - 80 cm no smell Sprouting. Without any locks and other tricks. I take the sieve, I take a non-transparent package of zip-lock, I take two clean cotton discs, wet the discs with clean mineral water, squeeze them to become slightly moist and they do not leak water, put the seed between the discs, all this thing put in an envelope zip-lock and breathe in it with its "carbon" gas, then close the envelope and send to a dry dark place with room temperature 23-24C (in the box For example). Day D Two days of waiting... on the third day of the seed sprouted and showed the spine, it's time to "plant"! In my experience - I make an acceleration of growth, so that I help the plant first of all get rid of the helmet and run on the full processes of photosynthesis (I do not advise you to produce it yourself, if you do not have the experience of "dumping the helmet" because sloppy and inaccurate actions you can harm or worse - to kill the future plant). With the help of two clean "tooth cleaners" carefully remove the helmet from the sprout. Immediately plant it in a peat pot of 1 liter with a "no substrate" substrate, namely "Ugro Pure Superior", which contains 80% pure coconut fiber, 5% perlite, 5% guano bats, 5% endomycosis and 5% biohumus. This substrate contains nutrients that will last for 2 weeks of sprout life, but I'm going to feed the vegetable in the second week of life, and it will be very good to eat! Closer to the third or fourth week, I'll transplant the vegetable into a 30 liter pot "Smart Pot", but for now we are gaining patience and just waiting. Watering the first week i carry out without fertilizer, but well "acidified" water, PH 5.7, PPM 250. Watering, as usual, at the beginning of the light cycle, and the cycle is set to 20/4. DAY 3 DAY 6
- 28 replies
-
- 2
-
- hst
- cob matrix
- (and 15 more)